MAINTENANCE
21
AIR-POWERED STAPLER 058-8132-2
•Air-operated tools must be inspected periodically and worn or broken parts must be replaced
in order to keep tools operating safely and efficiently.
• Inspect and replace worn or damaged O-rings, seals, etc. Tighten all screws and caps
frequently in order to prevent personal injury.
• Inspect the trigger, spring, and safety mechanism for free movement on a regular basis in
order to ensure that the safety system is fully functional. Verify that no parts are lose or
missing and no parts are sticking or jammed.
• Keep the magazine and the safety tip of the tool clean and free of any dirt or abrasive
particles.
Note: When temperatures are below freezing, maintain the tools in a warm condition using any safe,
convenient method.
To Next Page
Loading...
Need help?
General
