2
IMPORTANT
This tool should only be serviced by a qualified service technician.
READ ALL INSTRUCTIONS THOROUGHLY
GENERAL SAFETY PRECAUTIONS
Consider work area environment. Keep work area well-lit. Do not use tool in
presence of flammable liquids or gases.
Keep the work area clean. Cluttered work areas and workbenches invite injuries.
Keep children away. Do not let children touch tool. Keep children and bystanders
away from work areas.
Properly store tools away. When not in use, this tool should be stored in a dry,
locked place that is out of the reach of children.
Do not force the tool. To ensure safety, only use the tool for its intended purpose.
CAUTION: Do not attempt to operate this tool until you have thoroughly read
all instructions, safety rules and warnings. Failure to comply can result in fire, electric
shock, or serious personal injury. Save the Operating Manual and review frequently
for reference.
WARNING: When using power tools, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and personal injury.
Wear proper clothing. Do not wear loose clothing or jewellery, which can get caught
and draw you into moving parts. Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear protective hair netting to contain long
hair.
Safety glasses. Use protective eyewear or a dust mask when operating this tool.
Secure work. Use clamps or a vise to hold workpiece in place.
Do not overreach. Keep proper footing and balance at all times.
Stay alert. Avoid accidental start-ups. Use common sense. Do not operate tool when
you are tired or under the influence of drugs, alcohol, or medication.
Do not use tool if switch does not turn tool ON or OFF.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the tool.
Only use recommended accessories. Accessories that may be suitable for one
tool, may be hazardous when used on another tool.
When servicing a tool, use only identical replacement parts. Follow
instructions in the “Maintenance” section of this manual.
To Next Page
Loading...
