AVIARA OWNERS MANUAL / 186
4. Buckle the buckles on both sides of the hard top legs and
ensure that the velcro is secured around the hard top legs.
5. Cover the rest of the boat to the transom. Pull the canvas
down below the rubrail and use the ratcheting straps to
secure the cover onto the boat. Ratchet the straps until they
cannot be tightened further. The cover is designed to ratchet
very tight.
6. Unzip the rope cleat cover and pull aft on the drawstring until
the cover is lifted up towards the hard top, such that there
are no portions of the canvas that sag into the boat. Secure
the drawstring to the rope cleat on the cover. Zip the rope
cleat cover to prevent water intrusion.
NOTE: Covers are custom designed for each boat model. Your cover
has bow and stern sections that match the layout of your boat. It is
critical that the cover is oriented properly when installing.
Engine Flush
Models
Optional on stern drive models.
Purpose
Boats that will be operated in salt water (or brackish fresh water)
need to be rinsed after every use, including internal engine parts
where water has been drawn.
Location
The engine flush connections are mounted in the center sunpad
storage bins at the transom of the boat.
Operation
The engine flush connection allows for quick and easy
connection to a shore-side garden hose or similar hose to
quickly and easily flush the engine. See the Ilmor or Mercury
Engine Owner’s Manual for additional details regarding this
important function.
To Next Page
Loading...
