MasterCraft Aviara AV32

3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
•
•
•
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY
AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE
OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS
TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR
MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE
MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE
MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR
OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY
PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF
APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED,
WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT
DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is:
To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy.
We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm.
It is the clients responsibility to proofread and note any errors and/or corrections that need to be made.
Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20%
Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan
Magenta
Yellow
Black
White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100
O.D.: 5.78"
TPI: 10
Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 "
Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
•
•
•
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY
AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE
OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS
TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR
MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE
MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE
MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR
OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY
PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF
APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED,
WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT
DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is:
To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy.
We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm.
It is the clients responsibility to proofread and note any errors and/or corrections that need to be made.
Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20%
Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan
Magenta
Yellow
Black
White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100
O.D.: 5.78"
TPI: 10
Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 "
Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
• • •
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED, WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is: To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy. We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm. It is the clients responsibility to proofread and note any errors and/or corrections that need to be made. Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20% Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan Magenta Yellow Black White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100 O.D.: 5.78" TPI: 10 Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 " Label Repeat: 29.625 "
▼ LEADING EDGE ▼