AVIARA OWNERS MANUAL / 36
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
•
•
•
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY
AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE
OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS
TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR
MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE
MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE
MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR
OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY
PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF
APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED,
WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT
DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is:
To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy.
We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm.
It is the clients responsibility to proofread and note any errors and/or corrections that need to be made.
Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20%
Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan
Magenta
Yellow
Black
White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100
O.D.: 5.78"
TPI: 10
Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 "
Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
•
•
•
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY
AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE
OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS
TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR
MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE
MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE
MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR
OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY
PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF
APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED,
WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT
DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is:
To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy.
We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm.
It is the clients responsibility to proofread and note any errors and/or corrections that need to be made.
Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20%
Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan
Magenta
Yellow
Black
White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100
O.D.: 5.78"
TPI: 10
Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 "
Label Repeat: 29.625 "
▼ LEADING EDGE ▼
3.0"
OPERATE THE BOAT FROM A STANDING POSITION OR USE A BOLSTER IF NEEDED TO MAINTAIN A PROPER LOOKOUT AND
AN UNOBSTRUCTED VIEW AT ALL TIMES AS REQUIRED BY THE USCG RULES OF NAVIGATION. READ OWNER’S MANUAL
PORT
STBD
WARNING
Multiple technologies available on this boat may be
protected by patents. Please see
www.aviaraboats.com/patents for a comprehensive list.
AVIARA AVIARA
150
750127B
Die line
•
•
•
•
Approved
Not Approved
Final Approval Requires Signature Date
NOT AUTO APPLIED YES AUTO APPLIED
COLOR DISCLAIMER
EMAILED ART PROOF(S) ARE REPRESENTATIVE OF CONTENT ONLY
AND NOT AN EXACT REPRESENTATION OF COLOR. DUE TO THE NATURE
OF 4-COLOR PROCESS PRINTING, THERE ARE CERTAIN LIMITATIONS
TO MATCHING SPECIFIC COLORS. IF YOU HAVE CRITICAL COLOR
MATCHES, A PMS COLOR(S) MATCH SHOULD BE PROVIDED. THESE
MUST BE SPECIFIED PRIOR TO PROOF APPROVAL. AN EFFORT WILL BE
MADE TO MATCH COLOR(S) AS CLOSE AS POSSIBLE. IF NO PMS OR
OTHER ACCEPTABLE COLOR TARGET(S) (LIVE SAMPLE OR HARD COPY
PROOF PROVIDED BY YOU) HAVE BEEN SPECIFIED PRIOR TO PROOF
APPROVAL AND NO PRESS PROOF HAS BEEN REQUESTED,
WE WILL NOT BE LIABLE FOR PRODUCTS MANUFACTURED THAT
DO NOT MEET CUSTOMER’S EXACT COLOR SPECIFICATIONS.
LAMINATE / VARNISH
FINISHINGBARCODEMATERIALCOLORS
Rewind
I have read, understand, and agree to the conditions as stated above and in color disclaimer below that the attached proof is:
To insure correct reproduction of your order, please check this layout for; design, copy, and spelling accuracy.
We will not be responsible after confirmation of your approval for errors, omissions, etc. *Finished sizing can range +/- .79mm.
It is the clients responsibility to proofread and note any errors and/or corrections that need to be made.
Customer is responsible to notify the manufacturer if labels are being applied automatically. Please circle one before signing proof.
Additional Information
Scaled At 20%
Company: D & P Enterprises Part #: 1016-0106-32A Press: Digital Date: 09.20.2019 Artist: ALL
2115 Gloss Polyester Wind Direction:
Wind Out
All Temperature
511 Clear Gloss TTR
Cyan
Magenta
Yellow
Black
White
4C Process Symbology: None Core Size: 3" Core
Rolls of: 100
O.D.: 5.78"
TPI: 10
Perforated Every: 29.625"
Corner Radius: 0.125 "Label Width: 8.5 "
Carrier Width: 8.625 "
Label Height 29.5 "
Label Repeat: 29.625 "
▼ LEADING EDGE ▼
Boat Safety Labels
Warning labels are placed on your Aviara boat at the time
of manufacture to alert operators to potential hazards that
may not be obvious. These labels also indicate how to avoid
hazards. Warning labels should never be removed and must
remain legible.
If you suspect a label is missing, or if a label becomes damaged or
becomes unreadable (damaged, faded, or sun bleached), you should
have it replaced immediately.
To replace a warning label, contact your Aviara dealer and request a
new label.
The label’s part number is located in the bottom right corner
of every label (shown circled in green on the label on the
previous page).
It is the responsibility of the boat owner and occupants of the
boat to understand and comply with all warning labels and
safety recommendations and requirements. The operator of
the boat and the boat owner are responsible for the proper
operation of the boat and the safety of the occupants of the
boat. Failure to adhere to and comply with the on-product
warning labels and safety statements labeled as dangers,
warnings, and cautions that appear in this manual can lead to
serious injury, or death, as well as property damage. READ
AND ADHERE TO ALL WARNING PLATES AND LABELS from
bow to stern, including those that are installed inside the
engine compartment, lockers, and underneath seating.
To Next Page
Loading...
