MasterCraft HV700

2012-07-24 1211071
- 53 –
Function
Description
Min Depth
Alarm
The choices are:
• OFF or increments of ½ft from 1 to 100ft.
Fire
Extinguisher
The choices are:
• Enable (Popup)
• Disable (Popup)
Factory
Reset
This setting restores all factory settings to their original values. Choices are:
YES or NO.
Day
Brightness
Sets the screen brightness for daylight. Settings are: 1%, 2%, 3%, 4%, 5% and
10-100% in increments of 10%.
Night
Brightness
Sets the screen brightness for nighttime. Settings are: 1%, 2%, 3%, 4%, 5% and
10-100% in increments of 10%.
Gauge
Brightness -
Day
Sets the gauge brightness for daylight. Settings are: 10-100% in increments of
10%.
Gauge
Brightness -
Night
Sets the gauge brightness for nighttime. Settings are: 10-100% in increments of
10%.
Auto Tab
Settings
Page
The Auto Tab Settings provide the user with the opportunity to control the tab
positions for two trim tabs on the boat. The following can be controlled through
these settings:
• Speed settings
• Trim tab positions
• Turn Auto Limits ON and OFF
• Set the Auto Launch timing