MasterCraft MBS-1500

SAVE THESE INSTRUCTIONS
Burnisher Manual - PN 344249 - Printed in USA 05/12/06
P
AGE 1
READ ALL
INSTRUCTIONS
BEFORE
OPERATING
READ & FOLLOW ALL INSTRUCTIONS,
WARNINGS & CAUTIONS
BEFORE USING THIS BURNISHER
This burnisher will afford you many years of
trouble free operating satisfaction if it is
given proper care. All parts have passed
rigid quality control standards before being
assembled to produce the finished product.
Prior to packaging, the units again inspect-
ed for assurance of flawless assembly.
Your burnisher was protectively packed to
prevent damage in shipment. We recom-
mend that upon delivery, remove the unit
from its carton and carefully inspect it for
any possible damage in transit.
If damage is discovered, immediately notify
the transportation company that delivered
your burnisher. As a shipper, we are
unable to act upon any claim for concealed
damage. You must originate any claim
within 5 days of delivery.
These instructions are for your protection
and information. PLEASE READ CAREFUL-
LY ! Failure to follow these precautions could
result in injury or discomfort.
1000 / 1500 / 2000 RPM
BURNISHERS
SAFETY,
O
PERATION
&
MAINTENANCE
MANUAL

MasterCraft MBS-1500 Specifications

General

Motor Power	1.5 HP
Speed	175 RPM
Voltage	115V
Cord Length	50 ft
Motor	1.5 HP

Summary

Burnisher Safety, Operation & Maintenance Manual

Read All Instructions Before Operating

Emphasizes the importance of reading all instructions before beginning operation.

Important Safety Instructions

General Safety Precautions

Lists essential safety rules to follow during burnisher operation to prevent hazards.

Grounding Safety Instructions

Grounding Plug Safety

Details the risks of improper grounding and the necessity of using a properly grounded outlet.

Grounding Methods

Temporary Grounding Adapter Use

Explains the use and limitations of temporary grounding adapters for outlets.

Operating Instructions

Safe Burnisher Operation Procedures

Outlines the correct steps and precautions for operating the burnisher, including pad use and cord management.

Care and Maintenance

Routine Burnisher Maintenance

Covers essential cleaning, tightening, and inspection tasks for ongoing maintenance.

Troubleshooting Guide

Resolving Polishing Issues

Provides solutions for problems related to poor floor luster and polishing quality.

Addressing Machine Pulling or Skipping

Offers guidance on correcting issues where the burnisher pulls to one side or skips.

Diagnosing Machine Not Running

Lists common causes and solutions for the burnisher failing to operate.

1500 RPM Burnisher Operating Instructions

Specific Operating Guidelines

Details operational procedures specific to the 1500 RPM model, including wobble correction.

Carbon Brush Wear Indicator

Explains the function and maintenance required for the carbon brush wear warning light.

Handle Assembly Instructions

Attaching the Burnisher Handle

Step-by-step guide for assembling the handle to the burnisher chassis.

Floor Pad Installation

Securing the Floor Pad

Instructions for properly installing the buffing pad onto the burnisher's pad driver.

Care & Maintenance

Post-Operation Cleaning and Storage

Covers cleaning after use, cord inspection, and proper storage procedures.