2017 OWNERS MANUAL / 172
• Map Course – Touch to map another course.
• Exit – touch to return to the 3 Event screen.
• List of Courses - Touch UP and DOWN arrows to scroll the list and
choose a course.
JUMP SCREEN
TOURNAMENT OR TRAINING
The screen illustrates the display available when the event is Jump
Tournament; the three-event features are in tournament mode and
ready for settings. Use the Touch Commands in setting up, controlling
and tracking the Jump event.
Touch Commands Description
Cruise - Touch to turn cruise control ON or OFF.
(or press the Quick Access Key from this screen.)
Settings – Select to set the Buzzer Volume, Prop
Type, Timing Recap, and Jump Switch Timeout.
Save New – Select to setup a new rider profile.
See Profiles.
Change Event – Touch to select an event from
a list.
Course Manager – Allows you to map a course.
See Course Manager.
Jump Letter –Touch to select a Jump Letter,
Weight, and Distance using the arrows to
change the values. Touch [Accept] to save or
[Cancel] to close pop-up.
Press the [Start Gate] to begin Mapping.
NOTE: For Slalom, press the [Start Gate] button when the GPS
puck crosses the start gate.
For Jump, press the [Start Gate] button when the ski pylon cross-
es the start gate.
If necessary, touch [Cancel] to cancel the current mapping and
return to the course list.
Press the [End Gate] to complete Mapping.
Course Mapping Successful will appear on the screen.
Type the name of the course. Touch [Done]. This saved your changes.
The new name is highlighted. Touch [Done].
NOTE: Additional Options on the Course List pop-up.
• Auto Detect – Touch to select ON or OFF.
Auto Detect ON–the display automatically selects the nearest
mapped course, based on the longitude/latitude that is the same event
type the user is in (slalom or jump).
Auto Detect OFF–The user must select a course before running it.
• Edit Name – Touch to go back and edit a previously saved course.
To Next Page
Loading...
Need help?
General
