Need help?Do you have a question about the MasterCraft X26 2017 and is the answer not in the manual?
General| Length | 26 ft |
|---|---|
| Engine | Ilmor 6.2L |
| Ballast Capacity | 4, 300 lbs |
| Beam | 102 in |
| Draft | 30 in |
| Tower | ZFT4 |
| Seating Capacity | 18 |
Explains the function of the safety alert symbol and defines DANGER, WARNING, CAUTION levels.
Provides essential rules and precautions for safe operation while on the water.
Details federal requirements for PFDs and accessibility for safety.
Lists federally required safety equipment and recommended additional gear.
Details the safety equipment factory-installed on MasterCraft boats.
Highlights the dangers and penalties of boating under the influence of alcohol or drugs.
Details the instrument panel and 7" video screen layout for X and XT series.
Explains user profiles for cruise control, ballast, and trim settings.
Displays engine fault codes and descriptions.
Describes the boat's approximate fuel level readings.
Explains the function and purpose of resettable circuit breakers.
Details the operation of the single-lever gear shifter and throttle.
Explains the operation of the shift/throttle lever and trim control.
Covers fire suppression systems and the use of fire extinguishers.
Explains the boat's bilge system, drains, strainers, and scuppers.
Explains the function and operation of the attitude adjustment plate.
Lists pre-operation checks for safety and boat readiness.
Covers pre-operation checks and familiarization with controls.
Details the procedure for starting the boat's engine.
Provides guidance on proper boat loading and weight distribution.
Explains the causes and prevention of galvanic corrosion.
Provides essential care steps for boats used in salt water.
Outlines the schedule and importance of regular maintenance.
Details maintenance tasks for every 50 hours or quarterly.
Outlines annual maintenance tasks, recommended for dealer service.
Lists pre-operation checks for safety and boat readiness.
To Next Page
