2017 OWNERS MANUAL / 176
Touch [Settings]. Touch [Prop Type]. On the Pop-up, touch to set at
3 blade or 4 blade.
Touch [Settings]. Touch [River Mode] to select ON or OFF. With
River Mode ON, touch to set the River Dir Oset UP and DOWN
values using the arrows.
SETTINGS MENU
The Settings Menu screen can be accessed by pressing the
Quick Access Key. The following settings are available:
Touch Commands Description
User Settings – Allows you to customize
the display options for ambient light and
brightness, set US or metric units Tab,
Ballast and other settings.
Service Information – Provides
information about the software version,
dealer, oil changes and dealer services.
GPS Utilities – Displays Satellite Status
and Time and Position Setup options.
Factory Settings – Displays boat model,
center tab, surf tabs and depth transducer.
A dealer code is required to access.
Course Manager – Allows you to map a
course. See Course Manager.
Pull Type –Touch to select a Pull Type on
the pop-up.
Plus-Factor - Touch to select ON or OFF
from the pop-up. In the ON position, the
system will react sooner to both increase
and decrease in speed deviation. Used for
trick setting or additional throttle when entering the first gate.
TRICK SETTINGS
TOURNAMENT OR TRAINING
On the 3 Event Screen, touch the
Settings touch command to access the
pop-up list. Touch each option to view or
change the setting. When available, touch
the arrows to change the setting. Touch [Exit] to close the pop-up.
Touch [Settings]. Touch [Buzzer Volume]. On the Pop-up, touch the
arrows to set a value at high speed and low speed.
To Next Page
Loading...
Need help?
General
