4. Once the device has paired, the camera’s viewpoint will appear on
the screen. Controls at the bottom of the screen adjust the
camera’s mode, and can start and stop recordings.
• Controlling a GoPro camera with the dual screen dash is very
similar to controlling the camera’s functions on the camera
itself. Select the mode you wish to use and tap the RECORD
button to take photos, burst shots, videos and timed photos.
Connecting the camera allows users to control camera settings
while it is mounted to the boat tower or the transom GoPro mount.
NOTE: See the GOPRO CAMERA MOUNTS section of this Owner’s
Manual for additional information regarding GoPro camera mounts.
Location
There are three GoPro mounting locations around the boat. One on
the tower tow-point allows the camera to follow the action at the
end of the tow line, and the two mounted to the transom step are
designed to catch surf sets and swimmers o the platform (when
the engine is o.
Connecting
Connecting a GoPro camera for the first time requires pairing the
camera with the dash. Once paired, connecting a new device is very
simple. To pair a new device for the first time:
1. In one of the three tow modes, tap the GoPro button. The
following screen will appear:
2. Touch ADD DEVICE, the system will begin searching for available
GoPro Wi-Fi networks.
3. Select the camera you wish to pair from the list on the screen. If
prompted enter the password to connect to the camera.
2021MCOwnerManualFINAL.indd 111 8/26/20 1:51 PM
To Next Page
Loading...
Need help?
General
