MasterCraft NXT22 User Manual

The following screen will appear. Select one of the profiles from the
list and select ACTIVATE. The ballast will begin filling, the tabs will
deploy and cruise will set to the factory set speed.
Custom Surf Profiles
If you would like to further customize a profile for your personal style,
custom profiles may be added. To create a custom Surf profile:
1. Touch at the top left of the Profile Manager screen. The Pro-
file Name Screen will appear. Create a name for the new profile,
and tap the green arrow on the right side of the screen.
2. The Profile Function screen will appear. Select one of the surf set-
ting options (Left or Right, Steep or Mellow) and then touch Next.
3. The Set Speed screen will appear. Adjust the set speed using the
up and down arrows. Then touch Next.
4. The Set Tabs screen will appear. Adjust the tabs using the slider
or the up and down arrows. Then touch Next.
5. The Set Ballast screen will appear. Adjust the ballast levels using
the slider or the up and down arrows. Touch Next.
6. The Save screen will appear. To save the profile to be used at a
later time, touch SAVE & CLOSE. To save the profile and activate it
immediately, touch SAVE & ACTIVATE. A screen showing “Activat-
ed” will appear, then the home screen will show the newly created
profile as being active.
7. The newly created profile may be changed and saved from the
home screen as well. With the profile active, change the Ballast,
Tabs and/or set speed and touch the button beside the profile
name. This will update the profile with the new preferences.
Wakeboard Mode
MasterCraft created three wakeboard profiles for dierent ability
levels and recommends using the profile that most closely corre-
sponds to your riding level:
• Beginner - Designed for new riders learning to wakeboard for the
first time. Allows riders to get comfortable on a wakeboard at
slower speeds, and begin to learn surface tricks and wake cross-
ings. Recommended line length - 55-60 feet.
• Intermediate - Designed for riders learning their first wake-to-
wake jumps and learning basic inverts and spins. Recommended
line length - 55-60 feet.
• Advanced - Designed for riders seeking bigger airs for advanced
tricks. Recommended line length - 65-70 feet.
2021MCOwnerManualFINAL.indd 135 8/26/20 1:52 PM

MasterCraft NXT22 Specifications

General

Beam	98 in
Fuel Capacity	49 gal
Seating Capacity	14 people
Weight	4, 200 lbs
Engine	Ilmor 6.0L MPI
Dry Weight	4, 200 lbs
Horsepower	373 HP
Length Overall	22 ft