EasyManuals Logo

MasterCraft NXT22 User Manual

MasterCraft NXT22
466 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #355 background imageLoading...
Page #355 background image
2021 OWNERS MANUAL / 356
Water should be cold to lukewarm, but never more than
100 degrees.
Air dry only. Never apply heat to the fabric.
Begin by brushing o loose dirt, and then hose down the material.
Prepare a cleaning mixture of water and a mild, natural soap that
is free of detergents. Use a soft-bristle brush to clean, allowing the
soap to soak in. Rinse thoroughly and allow the fabric to thoroughly
air dry.
If stubborn stains persist, you can use a diluted chlorine bleach/
soap mixture for spot cleaning of mildew, roof run-o and other sim-
ilar stains. Please keep in mind that chlorine bleach will not change
the color of the fabric, but chlorine bleach will eventually break down
the fiber of any fabric. Therefore, this cleaning method should be
used as infrequently as possible.
The cleaning mixture should be mixed as follows:
Four ounces (one- half cup) of chlorine bleach.
One gallon of water.
Clean with a soft- bristle brush and allow the mixture to soak no
longer than twenty (20) minutes. Rinse thoroughly and allow to
completely air dry. Repeat if necessary.
Machine Washing Canvas Covers
Machine washing is not recommended, however if the canvas fits in
the washing machine MasterCraft recommends:
Use only natural soaps—no detergent.
Wash and rinse in cold water. Air dry. (Never put the fabric in a dryer.)
As part of the finishing process, the material has been treated with
a fluorocarbon finish, which enhances water repellency.
This finish is designed to last for several years, but it must be
replenished after a thorough cleaning. Based on test results, the
manufacturer recommends 303 High Tech Fabric Guard™ as the
preferred re-treatment product.
After cleaning and air drying, apply 303 in a thin, even coat. When
it has dried, apply a second thin, even coat. These two (2) light
coatings are more eective in restoring fabric water resistance
than a single heavy coating. Keep in mind that 303 High Tech Fabric
Guard™ will work only as well as it is applied. This means that the
fabric must be free of dirt and detergents or the Fabric Guard will
wash away with the dirt particles.
Fabrics should be retreated after thorough cleaning or after five (5)
years of use.
2021MCOwnerManualFINAL.indd 356 8/26/20 1:54 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft NXT22 and is the answer not in the manual?

MasterCraft NXT22 Specifications

General IconGeneral
Beam98 in
Fuel Capacity49 gal
Seating Capacity14 people
Weight4, 200 lbs
EngineIlmor 6.0L MPI
Dry Weight4, 200 lbs
Horsepower373 HP
Length Overall22 ft

Related product manuals