MasterCraft NXT22 User Manual

ENCLOSED HEAD
An enclosed head is found on the X26 model. The head should be
emptied on-shore within an acceptable holding tank, septic system
or sewer. It should never be emptied within the boating body of
water or on-shore, except in an approved receptacle.
The head should be cleaned after each outing. After thoroughly
cleaning with a mild detergent, add a neutralizing chemical made
especially for portable heads, such as that found in RV centers. The
neutralizing chemical will help deal with potential odors that might
otherwise be foul. (See also Head under the Boat Operations sec-
tion of this Owner’s Manual.)
UPHOLSTERY
While the vinyl is made to withstand the elements, it is important to
care for vinyl by keeping it clean at all times. Many substances may
stain the vinyl if left untreated over a period of time. Remember to
remove any contaminant and clean vinyl immediately.
Regular washing with mild detergent and warm water or vinyl
cleaners is sucient to keep the cushion and vinyl coverings in
good condition.
Do not soak the cushion, and dry thoroughly after washing to
prevent mildew accumulations when the boat is covered. Spray
the cushions with a mildew repellent and prop them up in the boat
when it is covered to take advantage of air circulation. MasterCraft
vinyl is made to withstand the eects of sun, heat, acid rain and
soiling, under normal conditions, but this does not preclude the
cleaning requirements. Please consult the following cleaning
recommendations before cleaning your upholstery.
2021MCOwnerManualFINAL.indd 357 8/26/20 1:54 PM

MasterCraft NXT22 Specifications

General

Beam	98 in
Fuel Capacity	49 gal
Seating Capacity	14 people
Weight	4, 200 lbs
Engine	Ilmor 6.0L MPI
Dry Weight	4, 200 lbs
Horsepower	373 HP
Length Overall	22 ft