Immediately following this introduction are photo images of the five
types of instrument panels utilized on MasterCraft boats. Operators
should match up the appropriate image with the actual instrument
panel on your boat.
The video screen operations are broken down into X and XT Series
information, which utilize a standard 4.5” screen or the optional
Dual Screen Dash, the ProStar, which uses a 7” screen, and the NXT,
which uses a 4.5” screen. MasterCraft encourages all boat owners
to go over the gauge and/or video screen operations with your au-
thorized MasterCraft dealer prior to operating the boat.
Do not become distracted while utilizing multi-functional screens.
Maintain situational awareness and do not change settings in
crowded boating/swimming areas.
VARIATIONS IN GAUGES
AND SWITCHES
Please note that not every gauge or switch explained in this Owner’s
Manual is found on every model. Some equipment is optional, and
not every option is available on all models of MasterCraft boats.
Also, MasterCraft utilizes a variety of gauge and switch styles
that may be dierent from the gauges or switches pictured in this
Owner’s Manual. These dierences between the various styles of
gauges and switches are not in functionality. If a boat is equipped
with a gauge or switch that is labeled as described, it will operate
in the same fashion as the description, even if its appearance is
dierent, as the appearance changes periodically.
If the owner and/or operators are uncertain about the purpose of
a gauge or switch, do not operate the boat until consulting with an
authorized MasterCraft dealer. Some gauges monitor information
that is critical to safe and long-term use of the boat. Some switches
can aect maneuverability, as well as operations that impact long-
term use of the boat.
2021MCOwnerManualFINAL.indd 75 8/26/20 1:51 PM
To Next Page
Loading...
Need help?
General
