2021 OWNERS MANUAL / 174
COURSE MANAGER– ALL SLALOM
AND JUMPING EVENTS
On the 3 Event screen, touch the Auto Detect / No Course Active
button, and the Course Manager screen will appear.
NOTE: Always highlight a course on the list page before mapping
a new course. When mapping a course, the program assigns the
mapping to whatever name is highlighted on the course list.
When auto detect is active, you do not have to select an active
course. The 3-Event head unit automatically starts the course and
timers based on your GPS location when you enter a course. If auto
detect is not active, you have to manually select a course you want
to follow.
Course Mapping Instructions
Step
Action
1
Highlight a course to be mapped, then touch .
2 Press Start Gate to begin mapping the course.
For Slalom, press the Start Gate button when the GPS
puck crosses the start gate.
For Jump, press the Start Gate button when the Ski
Pylon crosses the start gate.
3 Press End Gate to stop the mapping.
4 If necessary, touch Cancel to cancel the current
mapping and return to the course list.
Pull type is the amount of “pull” felt by
the skier as the boat adjusts to main-
tain the set speed.
A: Slower engine response out of the
buoy
B: Moderate engine response
C: Faster engine response
1: Softer pull behind the boat
2: Moderate pull behind the boat
3: Harder pull behind the boat
In the On position, the system
will react sooner to both in-
crease and decrease in speed
deviation.
Used for trick setting or addi-
tional throttle when entering
the first gate.
2021MCOwnerManualFINAL.indd 174 8/26/20 1:52 PM
To Next Page
Loading...
Need help?
General
