DRIVE MODE
Drive Mode displays basic operating information for cruising around
your body of water. In Drive Mode, quickly fill or empty ballast, adjust
tab positions, and activate speed control. When the system powers
on it always begins in Drive Mode.
Upper Half of Drive Mode:
Component Description
Wake Provides access to custom and factory set wake
profiles, AutoLaunch controls and ballast levels.
Provides access to GoPro Controls
Ski Provides access to custom and factory set ski
profiles, AutoLaunch controls and ballast levels.
Provides access to GoPro Controls
Chill (Stopped
Operation)
To be used when going less than 2 MPH or
stopped. Features expanded stereo controls.
Profile
Selection and
Creation
Provides the ability to choose and create custom
profiles with Tow settings.
Surf Tabs
Adjustment
Provides access to individually adjust tabs
AutoLaunch
Control (Triple
and Single)
When AutoLaunch Single is turned on, the center
tab is used to help push the boat up to plane.
When AutoLaunch Triple is turned on, all three tabs
are used to help push the boat up to plane.
ZeroO
Controls
Turns on and o the speed control system, and
provides adjustment to the cruise control set
speed.
Fill/Empty All
Ballast
Provides a quick method to fill or empty all of the
ballasts tanks and bags at one time.
GoPro Cam-
era Controls
Provides access a connected GoPro camera.
Volume
Controls
Provides access to control the sound’s volume.
Drive (Normal
Operations)
Drive mode is optimized for cruising from place
to place with controls for AutoLaunch, speed,
ballast and tabs
Surf Provides access to the four preset Surf
conditions (Mellow or Steep, Left or Right),
customize surf profiles by name, ballast level,
tabs. Provides access to GoPro Controls
Component Description
2021MCOwnerManualFINAL.indd 85 8/26/20 1:51 PM
To Next Page
Loading...
Need help?
General
