MasterCraft ProStar 190 - Page 70

GAUGE DIAGNOSTICS
Will put the system into an auto-
matic gauge sweep test mode. Press
theENTERbuttontoactivate.Press
theHOMEbuttontoexit.
ACTIVE ENGINE FAULTS
This is a tool used to determine
what faults are currently active in
theengineECM.Theywilldisappear
when no longer active.
INACTIVE ENGINE FAULTS
DEALER SERVICE RESET
The dealer has to reset the
DEALER SERVICE REQUIRED
alarm in this screen.
DEALER INFO PAGE
Will display either the factory
contact information or the dealer
contact information.
VIPER DIAGNOSTICS
 Atoolforthetechniciantouse
in testing the system. Press the
HOMEbuttontoexit.
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-43