M A S T E R C R A F T P R O S T A R
2014 MasterCraft Owners Manual • ProStar Supplement Page 9-17
Course Manager – Allows you to map a
course. See Course Manager.
Jump Letter –Touch to select a Jump
Letter, Weight, and Distance using the ar-
rows to change the values. Touch [Accept]
to save or [Cancel] to close pop-up.
RTB - Touch to select ON or OFF from
the pop-up.
Event Times - Display the event times as
the skier passes the mapped points. (Touch
the numbers to view the previously record-
ed times; Timing Recap.)
Jump Settings—
Tournament or Training
On the 3 Event Screen, touch the Settings
touch command to
access the pop-up
list. Touch each op-
tion to view or change the setting. When
available, touch the arrows to change the
setting. Touch [Exit] to close the pop-up.
Touch [Settings]. Touch [Buzzer Vol-
ume]. On the Pop-up, touch the arrows to
set a value at high speed and low speed.
Touch [Settings]. Touch [Prop Type].
On the Pop-up, touch to set at 3 blade or 4
blade.
To Next Page
Loading...
