MasterCraft X-2 User Manual

Use the UP and DOWN arrow buttons to navigate to the secondary screens from the main screens.
Quicklist Screen
 TheQuicklistscreendisplaysthecurrentrider’ssettingsontheleftsideofthescreenandalistofQuicklistActionsontheright.Theactivepor-
tionofthescreenishighlightedwithalargeredframe.ArrowUPorDOWNtohighlightanyactioninthelistwithasolidredboxandpressENTER
to select that action.
 TheADDandEDITactionsareverysimilar.ADDcreatesanewriderintheLISTandEDITallowschangestobemadetoanexistingriderinthe
LIST.
 ToADDanewrider,arrowdowntoADDandpressENTERtoactivatetheADDmode.Thelargeredframewillmovetotheleftsideofthe
screenandablankriderproleisactive.ArrowUPorDOWNtomovethesmallerredhighlightboxovertheridersettingyouwishtochangeand
pressENTERtoactivatetheitem.Thelargeredframewillmovetotheactiverightsideofthescreen.UsethePLUSandMINUSbuttonstochange
thevalueoftheitem,thenpressENTERtocompletethechangeandbouncebacktotheleftsideofthescreen.Repeattheprocessasneededfor
each item you wish to edit.
 ToEDITanexistingrider,youmustrstselectthatriderfromthelistifnotalreadyactive.ArrowDOWNtohighlightLISTandpressENTER.ArrowUP
orDOWNtothedesiredriderandpressENTER.Thisriderisnowactive.ArrowUPtohighlightEDITandpressENTERtoactivatetheEDITmode.Change
therider’ssettingsjustasyoudidwhenaddinganewrider.Allchangesareautomaticallysavedtotherider’sprole.
EDIT
        RIDERNAMEcanbeupto14
        characters.Ifthenameisless
        than14,keeppushingENTER
until the highlight box bounces
back to the left side of the screen.
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-39

MasterCraft X-2 Specifications

General

Brand	MasterCraft
Model	X-2
Category	Boat
Language	English