2023 OWNER’S MANUAL
/
106
Component Description
and
AM/FM: Scan to previous or next
detectable signal. WB: Tune to next
channel. USB: Next track.
and
Fine tune the current station
Save a favorite station. Tune into the
station, then press and hold the slot
for approximately 3 seconds.
Volume adjustment. Touch and drag
the slider to adjust volume.
Mutes and unmutes volume
Weather Band
When WB (Weather Band) is selected as the audio source, you
may choose 1 of 7 National Weather Service channels in order to
obtain regional weather information. To select an NWS channel,
use the tuning arrows or pick a station from the channel list.
To switch between stations, touch or . Touching or will
scan for detectable signals. If you have a favorite station and wish
to save it as a preset, touch and hold . Mute or unmute volume
using . Set volume using the volume slider.
Volume controls for Weather Band audio sources are identical to
those used for FM and AM sources, detailed above. The following
table breaks down the name and function of each button found on
the Media Page.
To Next Page
Loading...
Need help?
General
