413
/
2023 OWNER’S MANUAL
Aluminum wheels also require attention to routine maintenance,
particularly in keeping them clean. Failure to do so may result in
damage that is not covered by warranty.
The trailer and wheels should be washed weekly during boating
season, and after every use if the trailer has been submerged in
salt or brackish water. Use a soft brush, mild detergent and/or mild
degreaser. A quality spray-on wheel cleaner may also be used.
Ensure that any product used is specifically indicated for use on
aluminum. (Many cleaners are too harsh and will result in pitting or
other damage to the wheel surface.) Many car washes use strong
chemicals and should be avoided when that is the case.
Removing road film, contaminants and brake dust (all of which
retain moisture) is critical to ensuring that the wheels will retain
their luster and quality finish for a long period of time. Any
exposure to a harsh winter climate, particularly road salt and/
or chemicals, or submersion in salt water at any time, requires
immediate cleaning.
NEVER CLEAN WHEELS THAT ARE HOT. Allow wheels to cool or
cool them with running water. If the wheels are too hot, significant
damage can occur to the wheels.
Wheels must always be cool or cold to the touch prior to cleaning.
Failure to allow wheels to cool sufficiently can result in damage
that is not covered under warranty.
It is also important to seal the wheels with a sealant that reduces
static and resists brake dust. Check at an automotive supply store
for an appropriate sealant.
Lug Nuts or Wheel Bolts
Loose wheel mounting nuts (lug nuts) can cause more than just an
annoying wheel wobble—it’s possible to lose a wheel. Before each
trip check for loose or missing lug nuts/wheel bolts.
Ensure that all lug nuts are secure
prior towing a MasterCraft trailer.
Failure to do so can cause a wheel
to disengage from the hub. This
can cause damage to the trailer
that may not be covered under
warranty. Serious injury or death
to the driver, any passengers and/
or other motorists can occur.
When tightening the lug nuts, use a correctly sized wrench.
The wrong size can round o the lug nuts and render them
useless. If you lose a lug nut, replace it promptly. The correct size
varies with dierent models, so verify the proper size with an
authorized MasterCraft dealer.
Take special care to ensure that the replacement lug nut is the
correct type and size. While the threads of the v may match, the
To Next Page
Loading...
