79
/
2023 OWNER’S MANUAL
Immediately following this introduction are photo images of the
five types of instrument panels utilized on MasterCraft boats.
Operators should match up the appropriate image with the actual
instrument panel on your boat.
The video screen operations are broken down into X and XT Series
information, which utilize a standard 7” screen or the optional Dual
Screen Dash, the ProStar, which uses a 7” screen, and the NXT,
which uses a 4.5” screen. MasterCraft encourages all boat owners
to go over the gauge and/or video screen operations with your
authorized MasterCraft dealer prior to operating the boat.
Do not become distracted while utilizing multi-functional screens.
Maintain situational awareness and do not change settings in
crowded boating/swimming areas.
VARIATIONS IN GAUGES
AND SWITCHES
Please note that not every gauge or switch explained in this
Owner’s Manual is found on every model. Some equipment
is optional, and not every option is available on all models of
MasterCraft boats.
Also, MasterCraft utilizes a variety of gauge and switch styles
that may be dierent from the gauges or switches pictured in this
Owner’s Manual. These dierences between the various styles of
gauges and switches are not in functionality. If a boat is equipped
with a gauge or switch that is labeled as described, it will operate
in the same fashion as the description, even if its appearance is
dierent, as the appearance changes periodically.
If the owner and/or operators are uncertain about the purpose of
a gauge or switch, do not operate the boat until consulting with an
authorized MasterCraft dealer. Some gauges monitor information
that is critical to safe and long-term use of the boat. Some
switches can aect maneuverability, as well as operations that
impact long-term use of the boat.
To Next Page
Loading...
Need help?
General
