MasterCraft X22 User Manual

Troubleshooting
If lights do not operate, check the main circuit breaker panel
to determine if a circuit may have tripped. Reset the circuit; if
it continues to trip, take the boat to an authorized MasterCraft
dealer. If the circuit breaker has not tripped, the bulb may have
burned out. Although the lights are LEDs, which rarely burn out, it
is possible. Take the boat to an authorized MasterCraft dealer to
have the bulb replaced.
2021MCOwnerManualFINAL.indd 245 8/26/20 1:52 PM

MasterCraft X22 Specifications

General

Length	22'4"
Surf System	Gen 2 Surf System
Beam	102 inches
Draft	30 inches
Engine Options	Ilmor 6.0L