MasterCraft X22 User Manual

2021 OWNERS MANUAL / 360
• Mild Dish Soap
• 303 High Tech Fabric Guard™
• 303 Fabric and Vinyl Cleaner™
• Babe’s Seat Soap
Non-Recommended Products
• ArmorAll
• Bleach
• Baking Soda
• Fantastik
• Formula 409
• Murphy’s Oil Soap
• Son-of-a-Gun
• Simple Green
• Anything not listed on the Recommended Products list
SeaDek Pads
Models
All X, XT, NXT, and Star Series models.
Purpose
SeaDek provides an EVA foam-based alternative to carpet. SeaDek is
installed using a stick-on adhesive and is not intended to be removable.
Location
SeaDek pads adhere directly to the flooring, gunnels and other
locations around the boat.
Care
SeaDek Marine Products recommends using Dek Magic
TM
cleaner,
which has been specifically developed for easy cleaning of PE/EVA
nonskid materials and is eective on a variety of stains. Dek Magic
is available for purchase on seadek.com. For best results, wet with
water then spray Dek Magic liberally over the entire area. With a
medium bristled brush, lightly work the product in. Let the cleaner sit
for 3-5 minutes then use water to dampen the area and lightly scrub
again. Rinse the cleaner o thoroughly and dry with a clean towel. If
you encounter a stubborn stain, repeat these steps as needed.
If Dek Magic is not available, see the below steps for other cleaning
options.
Dirt and Footprints
Use an all-purpose cleaner, degreaser, or dish soap along with
warm water and a medium bristled brush. Thoroughly work the
soapy mixture into the SeaDek until stain comes up. Rinse with
clean water and repeat if necessary.
2021MCOwnerManualFINAL.indd 360 8/26/20 1:54 PM

MasterCraft X22 Specifications

General

Length	22'4"
Surf System	Gen 2 Surf System
Beam	102 inches
Draft	30 inches
Engine Options	Ilmor 6.0L