MasterCraft X25 User Manual

During Operation
• Checkgaugesfrequentlyforoperatingconditions.
• Payattentionthatcontrolsoperatesmoothly.
• Noteanyexcessivevibration.
After Operation
• Checkforuidleaks.
• Inboatsequippedwithaballastsystem,drainwaterfromtheballastsystembefore
placing the boat on the trailer. If the boat has ballast-pumping assistance to remove
waterfromtheballastsystem,notethattheenginemustberunningatleast1500RPM
during the pumping process (for both fill and empty operations). This will necessitate
draining water prior to ceasing operation of the boat and loading on the trailer. More
information regarding ballast systems appears in various sections of this Owner’s
Manual.
•Checkthens(whereequipped),propeller,rudderandshaftfordamageafterremovingthe
boat from the water.
2013 MasterCraft Owners Manual • Preparation • Page 4-6
Safety Checks & Services

MasterCraft X25 Specifications

General

Beam	8 ft 6 in
Draft	28 in
Seating Capacity	16 People
Engine Options	Ilmor 6.2L
Engine	Ilmor 6.0L