MasterCraft X26 User Manual

2021 OWNERS MANUAL / 218
This function should be done sparingly. Over-revving the engine
for any extended period can cause undue wear and tear on the
engine. Avoid advancing to wide-open-throttle and holding the
RPMs at that level.
Troubleshooting
If the shift/throttle lever will not move, be certain that the lifter
under the ball knob is lifted up before attempting to move the lever
forward or aft. If the lever still will not move, contact your authorized
MasterCraft dealer.
Never attempt to shove or force the lever. If it does not move
smoothly when operated as indicated, there may be an issue involv-
ing the system that requires correction in an area under the deck,
which is inaccessible to the consumer.
2021MCOwnerManualFINAL.indd 218 8/26/20 1:52 PM

MasterCraft X26 Specifications

General

Length Overall	26' 5"
Engine	Ilmor 6.2L
Ballast Capacity	4, 300 lbs
Beam	102 in
Draft	30"
Engine Options	Ilmor 6.2L, Ilmor 7.4L
Tower	ZFT4
Seating Capacity	18