MasterCraft X26 User Manual

TOW MODE
Surf Mode
Selecting the Surf Tow Mode will display the screen below, allowing
control of factory surf profiles, user created custom surf profiles,
ballast tanks, tabs, cruise speed, and GoPro cameras. While there
are controls for AutoLaunch, surf waves will develop much faster
with AutoLaunch OFF.
In addition, Surf Mode features the ability to easily switch the wave
from one side of the boat to the other. While surfing, switch the wave
by tapping the LEFT or RIGHT buttons. The wave will switch sides in
under three seconds.
Profile As Seen on Screen
Mellow Left
Mellow
Right
Steep Left
Steep Right
Stock Surf Profiles
MasterCraft provides four preset, factory tuned profiles to enhance
the surfing experience. To set a profile, tap LEFT or RIGHT, then select
either a STEEP or MELLOW wave
2021MCOwnerManualFINAL.indd 89 8/26/20 1:51 PM

MasterCraft X26 Specifications

General

Length Overall	26' 5"
Engine	Ilmor 6.2L
Ballast Capacity	4, 300 lbs
Beam	102 in
Draft	30"
Engine Options	Ilmor 6.2L, Ilmor 7.4L
Tower	ZFT4
Seating Capacity	18