Factory Settings
From the Main Menu screen, highlight the Factory Settings feature
and press the Display Key under SELECT to open the Factory Set-
ting screen.
The Factory Settings allow your dealer to customize features. A
Dealer Code is required to access this screen.
TROUBLESHOOTING
Display Appears Not To Work Or Doesn’t Come On.
1. Display could be in sleep mode. Select a key on the keypad to
activate the display.
2. Check for loose connections at battery and display unit.
3. Check for reversed polarity on the power connections.
4. Verify battery has a minimum voltage of six volts.
Display resets or goes OFF when starting engine.
1. Check display supply wires are connected properly to battery.
2. Verify battery is charged properly.
3. Check battery for efficient starter current.
Display has no back light.
Contact your MasterCraft service center.
Display has no keypad back light.
Contact your MasterCraft service center.
To Next Page
Loading...
Need help?
General
