2016 OWNERS MANUAL / 099
New User Profile Display Instructions
The new rider’s name is listed
above the Activate Touch
Command. Touch [Activate] to
activate the rider settings.
The GEN2 Surf System screen
will appear with the new profile
activated. From this screen,
you can turn On/Off Cruise;
set the preferred speed for the
profile; deactivate the current
profile; turn on/off the Auto
Launch/Exit; save the settings
to the current profile; and save
the settings to a new profile.
Delete Current Profile
A rider profile can be deleted using the HV700 Touch. To delete a
new profile, press the Profile Quick Access Key.
Delete Current Profile Display Instructions
Slide finger across the slide bar
to position the rider’s profile
name in the highlighted posi-
tion. Touch [Delete] to delete
the current profile.
A confirmation overlay is
displayed. Touch [Cancel] to
abort the process and [Yes] to
confirm delete.
Profile has been deleted will
appear. Touch [OK] to return to
the Profiles screen. The rider
will no longer be listed in the
slide bar.
To Next Page
Loading...
