Touch and the screen appears with discoverable Wi-Fi networks
to which you may connect::
If necessary, touch to refresh the Wi-Fi list. Choose the appro-
priate network to which you wish to connect. If a network is present
but isn’t displaying (perhaps it is hidden for select people), select
the button and type in the network name and password, and
touch Continue.
If the connection is successful, the screen will appear showing the
appropriate network name. A notification will eventually appear
when a software update is available.
FUEL MANAGEMENT
The fuel management software in MasterCraft boats directly connects
the boat operator to the management of their fuel. This system collects
precision information on fuel flow levels from the engine controller. It
then calculates and displays the amount of fuel remaining based on
engine activity and the usable size of the fuel tank.
As a safeguard, there is a back-up low fuel sensor that signals any
discrepancies between the computer and the actual amount of fuel
in the tank.
Using Fuel Management Sofware
Upon keying the boat on, the touchscreen display will ask the
operator if they have added fuel to the boat.
If the answer is no, tap NO on the screen to close the fuel
management system. If the answer is yes, tap YES on the screen.
This will display the fuel level entry page. The operator can input the
amount of fuel added, or tap the FULL button to indicate that the
tank has been filled completely. Fuel levels will be displayed next to
“Amount” at the top of the screen.
Press SAVE to exit to the menu screen.
Should an operator input the wrong amount of fuel, there are
several fail-safes in place. To immediately correct an input
error, navigate to the Main Menu tab and scroll to and tap FUEL
MANAGEMENT. This will re-open the fuel level entry page.
2021MCOwnerManualFINAL.indd 103 8/26/20 1:51 PM
To Next Page
Loading...
Need help?
General
