When low fuel warning is displayed immediately empty all ballast
tanks and proceed to the nearest fueling station or dock.
DIAGNOSTICS
All engine, PDM, EPDM and Tab diagnostic information can be
found under DIAGNOSTICS on the main menu. Tap one of the four
diagnostic options to pull up system diagnostics.
Engine Diagnostics
Shows the number of both Active and Stored faults and which fault
number is currently being displayed. To advance to the next fault,
touch NEXT. Touch PREVIOUS to go back to the previous fault.
SPN — Suspect Parameter Number — fault code. If not translated
into text by the display, see the engine manufacturer’s literature for
the definition of the SPN number.
FMI — Failure Mode Indicator — fault code. The FMI is defined by
SAE J1939. If not translated into text, see the SAE standard, or the
engine manufacturer’s literature.
Description Field — Most common SPNs and FMIs have text for
the description stored in the display. If there is no text, refer to the
engine manufacturer or the SAE J1939 standard. NOTE: This field is
only used with certain engine models.
2021MCOwnerManualFINAL.indd 105 8/26/20 1:51 PM
To Next Page
Loading...
Need help?
General
