2021 OWNERS MANUAL / 288
they cannot be tightened further. The cover is designed to ratchet
very tight.
For X Series models pull the cover down below the style line as
pictured. Use the ratcheting straps to secure the cover in place.
Correct Placement - XT Series
Correct Placement - NXT Series
Correct Placement - X Series Incorrect Placement - X Series
6. Unzip the rope cleat cover and pull aft on the drawstring until
the cover is lifted up towards the tower, such that there are
no portions of the canvas that sag into the boat. Secure the
drawstring to the rope cleat on the cover. Zip the rope cleat cover
to prevent water intrusion.
NOTE: Covers are custom designed for each boat model. Your cover
has bow and stern sections that match the layout of your boat. It is
critical that the cover is oriented properly when installing.
Failure to use anti-pooling poles to support the mooring cover
during storage, or while trailering the boat could cause damage to
the mooring cover, the boat, or the trailer.
2021MCOwnerManualFINAL.indd 288 8/26/20 1:53 PM
To Next Page
Loading...
Need help?
General
