151
/
2023 OWNER’S MANUAL
To Connect via USB Cable:
1. Plug your device’s charging cord into the USB port, mounted under
the throttle control.
2. Your device will begin charging and will be connected to the
boat’s system.
3. Navigate to, and select USB MEDIA from the stereo source list to get
access to your phone’s music collection. Launch a music application
on your device and it will display on the screen (Apple devices only,
Android devices can only play music that has been downloaded to
the device’s internal storage).
BLUETOOTH SETTINGS
Connecting via Bluetooth allows operators to connect to the boat
wirelessly, play audio and display song information. To customize
Bluetooth settings, navigate to the settings tab and select
BLUETOOTH MANAGER. From here you can pair new devices or
re-connect paired devices using the on screen buttons. To pair a
new device, select +ADD NEW DEVICE and follow the on-screen
prompts.
VOLUME / EQUALIZER
Audio Zones
This tab allows full control over the sound zones in the boat. The
software features both a master volume and four individual zone
volumes: Bow, Sub, Cockpit and Tower. The zone volume levels
reflect a percentage of the overall master volume. If the master
volume is at 20 and a zone is at 40, then the zone is playing at 100
percent of the current master volume level. If a zone volume level
is set at 20, then the volume in that zone is playing at 50% of the
overall master volume. To play the speakers at maximum volume,
turn all zones up to 40, then turn the master up to 40.
Mute a zone by selecting a zone and tapping the mute button ( ).
Mute all zones by deselecting all zones then tap the mute button.
To Next Page
Loading...