2023 OWNER’S MANUAL
/
166
This is a graphical representation of the
ballast.
The blue section represents the current
water level.
The green section represents the amount
of water being added (when increasing the
Ballast).
The red section represents the amount of
water being drained (when decreasing the
Ballast).
You may touch the specific color section
and slide up to fill or down to empty the
Ballast.
Utilize the up and down
arrows to increase or
decrease the Ballast.
Utilize these buttons to Fill completely
or Drain completely the Ballast.
The Stop button will appear in
mid process to halt at the
displayed percentage.
BALLAST
The Ballast controls can be accessed by pressing the Ballast
button. The following screen will appear:
Touch the X to close the Ballast controls.
Touch Point Commands
To Next Page
Loading...
Need help?
General
