EasyManuals Logo

MasterCraft XT24 2023 User Manual

MasterCraft XT24 2023
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #216 background imageLoading...
Page #216 background image
2023 OWNER’S MANUAL
/
210
Location
Depending on the model, the ignition key slot may be found on the
dash or driver’s arm rest. Consult the “Individual Models” chapter
of this Owner’s Manual for further information.
Operation
Insert the ignition key into the ignition slot. You will notice that
there are two positions for the key: “O” and “On.” Turn the key
to the “On” position. Then—before activating the engine—run
the blower for at least four (4) minutes. Unless necessary, you
should never leave the ignition switch in the “On” position for any
extended period of time without the engine running, as this will
discharge the battery.
Troubleshooting
If the key will not turn in the key slot, make sure that you have
inserted the right key.
If the key turns but you receive no power, the battery or batteries
might not have enough charge. Check the voltmeter for a reading.
If the charge is under 11.5 volts or does not register, the battery
needs charging. Use the charger supplied with the boat
Do not attempt to jump start the battery or batteries from
a vehicle or another boat. Doing so may overload the boat’s
electrical system, resulting in significant damage to the boat.
This holds true regardless of battery brand. The warranty will not
cover damages resulting from an attempted jump.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft XT24 2023 and is the answer not in the manual?

MasterCraft XT24 2023 Specifications

General IconGeneral
BrandMasterCraft
ModelXT24 2023
CategoryBoat
LanguageEnglish

Related product manuals