2023 OWNER’S MANUAL
/
214
This function should be done sparingly. Over-revving the engine for
any extended period can cause undue wear and tear on the engine.
Avoid advancing to wide-open-throttle and holding the RPMs at
that level.
Troubleshooting
If the shift/throttle lever will not move, be certain that the lifter
under the ball knob is lifted up before attempting to move the
lever forward or aft. If the lever still will not move, contact your
authorized MasterCraft dealer.
Never attempt to shove or force the lever. If it does not move
smoothly when operated as indicated, there may be an issue
involving the system that requires correction in an area under the
deck, which is inaccessible to the consumer.
To Next Page
Loading...