2023 OWNER’S MANUAL
/
260
and water may need oil 1-2 times a month for the first year.
If the platform starts to get a tacky or gummy feel, oiling may be
too frequent and the platform should be oiled less often.
To oil the platform:
Before oiling the platform, you will need teak, tung or linseed oil.
1. Before applying teak, tung or linseed oil to seal and protect the
platform, the wood should be cleaned and with a mild soap and
water mixture. Harsher cleaners can damage and strip the wood’s
finish.
2. Use a sti bristled brush or rag to clean away dirt and stains. After
cleaning, pat the platform as dry as possible with a clean towel, then
let the platform air dry.
3. Use a cloth or brush to saturate the platform with teak, tung or
linseed oil (front, back and edges). Push the oil into all cracks,
crevices and end grain.
4. Let the platform dry in the shade for 30-45 minutes. After the
platform has had time to soak in fresh oil, use a soft cloth to gently
bu o all excess oil that does not soak into the platform.
SKI RACKS
Models
ProStar, as an option.
Purpose
The ski racks provide a sleek and attractive method to store skis
in the gunwales on both sides of the boat interior. These ski racks
are constructed with anodized aluminum and particular attention
must be paid to prevent corrosion. See Corrosion in the Care and
Maintenance section of this Owner’s Manual.
Location
The ski racks are mounted to the inward side of the deck.
To Next Page
Loading...
Need help?
General
