2023 OWNER’S MANUAL
/
338
Stopping
1. Slowly bring the control lever to the neutral position. If the
boat has been driven for a long period of time or at high
speed, allow the engine a two-to-three (2-3) minute cool-
down period at low idle (600-800 RPM).
2. Press the ENGINE START-STOP button.
3. At the conclusion of the outing, turn the key o and remove
from the key slot. Turn the battery switch to “O”. Doing so
will ensure that you have turned OFF the electrical system,
and prevent others from starting or running the boat.
4. If any problems were encountered during operation, have the
boat inspected by an authorized MasterCraft dealer.
Request any necessary repairs before resuming operation of
the boat.
To Next Page
Loading...
Need help?
General
