2023 OWNER’S MANUAL
/
382
NOTE: If there is evidence of loose fuel fittings, deteriorated
lines or other problems associated with the fuel system, call an
authorized MasterCraft dealer. Fuel system service on later-model
MasterCraft boats requires special service tools and special
training. Due to the potential for serious consequences when
errors occur in servicing the fuel system, MasterCraft strongly
encourages all boat owners and operators to seek professional
assistance from an authorized MasterCraft dealer’s service
department whenever any service or perceived problems occur
within the fuel system.
All replaced fuel components must meet United States Coast
Guard (“USCG”) and American Boat & Yacht Council, Inc. (“ABYC”)
standards, and must be Underwriter’s Laboratory (“UL”)-approved.
Inferior quality components pose a serious safety threat to you
and others, and the use of inferior components may result in
serious injury or death. Resulting damage may void the warranty.
All MasterCraft models are equipped with a fuel fill cap. These
caps are hinged, and they snap open or closed to seal with an
audible click. This is important for the system on these boats to
operate correctly. Be sure to fully snap the cap shut after each fill.
As part of the Annual Maintenance, the fuel filter must be changed.
Due to the pressurized fuel lines, this maintenance can be done
only by authorized MasterCraft dealers.
Fire Extinguisher And Suppression Units
MasterCraft recommends that boat owners include a check of
the fire suppression and extinguisher units during the annual
maintenance to be sure that they are always ready for use. Some
units may not require annual checks; refer to the signage and
labeling on the individual units for further guidance.
Other Maintenance
Boat owners are required to perform routine regular maintenance
as well as annual requirements, as outlined in the engine owner’s
manual. Some standard or optional equipment on boats may come
with their own printed information that includes maintenance
required to keep such components in excellent long-term
operating condition. Always follow these instructions.
To Next Page
Loading...
Need help?
General
