What to do if the workpiece is slipping from my hand using MasterForce Power Tool?
If the workpiece is slipping from your hand, it is likely not supported or clamped properly. Support the workpiece using an extension wing or clamps.
Why does the chuck fall off the spindle of my MasterForce Power Tool?
The chuck may fall off the spindle due to dirt, grease, or oil on the tapered surface on the spindle or in the chuck. Clean the tapered surfaces of both the chuck and the spindle with a household detergent.
General| Brand | MasterForce |
|---|---|
| Model | 240-0065 |
| Category | Power Tool |
| Language | English |
To Next Page
