6
SAFETY SYMBOLS FOR YOUR TOOL
The label on your tool may include the following symbols.
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
~
Alternating current
Direct current
n
o
No-load speed
Class II construction, Double Insulated
.../min Revolutions or Strokes per minute
Indicates danger, warning or caution. It means attention!
Your safety is involved.
DESCRIPTION
The screwdriver is a light-duty tool for tightening and loosening screws. It
is lightweight and easy to use, featuring both a forward / reverse indicator
and work light. To secure your new rechargeable screwdriver from possible
failure, it is supplied in a low charge condition when shipped out.
1) On/Off Trigger Switch
2) Forward/Reverse Switch
3) Screwdriver Bit Collet
4) Work Light
5) LED Forward/Reverse Indicator
6) Work Light Switch
7) Charging Socket
8) Power Unit
9) Power unit jack
To Next Page
Loading...