SAVE THIS MANUAL
• Reference this manual for all safety warnings and precautions , operating and
maintenance procedures , parts list and diagrams.
• Keep your invoice with this manual and write your invoice number on the inside
of the front cover.
• Keep the manual and invoice in a safe, dry place for future reference.
• Reference this manual for all safety warnings and precautions , operating and maintenance
• Be sure to read and understand all safety instructions in this manual , including all
safety alert symbols such as "danger", "warning", and "caution " before using this tool.
Failure to follow all instructions may result in serious personal injury.
• Save all warnings and instructions for future reference.
INFRARED THERMOMETER SAFETY INSTRUCTIONS
IAWARNING:I
• To prevent possible electrical shock , fire, eye damage , and personal injury read all
safety Information before you use the product.
• Use the product only as specified , or the protection supplied by the product can
be compromised.
• Do not use the product around explosive gas , vapor, or in damp or wet environments .
• Do not use the product if it operates incorrectly .
• See emissivity information for actual temperatures . Reflective objects result in lower
than actual temperature measurements . These objects pose a burn hazard .
• Do not look directly into the laser with optical tools (for example , binoculars , telescopes ,
microscopes). Optical tools can focus the laser and be dangerous to the eye.
• Do not look into the laser. Do not point laser directly at persons or animals or indirectly
off reflective surfaces. The laser beam is dangerous to eyes.
• Use the product only as specified , or hazardous laser radiation exposure can occur.
• Do not use laser viewing glasses as laser protection glasses. Laser viewing glasses
are used only for better visibility of the laser in bright light.
• Have an approved technician repair the product.
·a::iuaJaIac1 aJn1n::1 J0:J suo1pnJ1su1 asa41 aAes ·1enue1111 s,Jo\eJado pue\sJapun
puy peac11sn1111 Jasn 'Am[u1
/0 )1S!cJ a41 a::inpacJ 011 :No1.1nv:>YI
~
1'10N'1W SJ:10.1 '1~3d0
~
C66~·Cvl!
JataWOWJ8lU paJeJJUI
.J4:J.l{0¥1f/1lSfJJJUJ
ELECTRICAL SAFETY
IA. CAUTION: I
To avoid damage to the Product or the equipment under test, protect them from:
• EMF (electro-magnetic fields) from arc welders , induction heaters, etc.
• Static electricity
• Thermal shock (caused by large or abrupt ambient temperature changes . For highest
accuracy , allow 30 minutes for Thermometer to become stable before use).
BATTERY USE AND CARE
For safe operation and maintenance :
• Remove the batteries if the product is not used for an extended period of time, or if stored
in temperatures above 50°C / 122°F. If the batteries are not removed, battery leakage can
damage the product.
• Replace the batteries when the low battery indicator shows to prevent incorrect measurements.
• Have the product repaired before use if the batteries leak.
• Be sure that the battery polarity is correct to prevent battery leakage .
• Do not short the battery terminals together, do not keep cells or batteries in a container
where the terminals can be shorted .
• Do not put battery cells and battery packs near heat or fire. Do not put in sunlight.
SPECIFICATIONS
Power Supply
1 x 9 V 6F22/6LR61
Temperature measurement range
-40°F to 986°F (-40°C to 530°C)
Measurement accurac y for T
> 0°c
±(2% of reading±2 °C) (0°C-300°C)
±3%(300°C-530 °C)
Measurement accuracy for T < 0°c
±3°C ( <0°C- -40°C)
Laser Class
2
Wave Length (;\)
630-660mm
Output Power (Pmax)
< 1mW
Operating temperature
(0°C up to 40°C) (32°F up to 104°F)
Air humidity (no condensation)
,; 75%
Dimensions :
approx. 121x44x177mm
Weight without battery
0.3 lbs
80Lv9 IM 'aJ1e1::, ne3 '"QUI 'pJeuav,J 9~0G@
~
W3H.l .lnOH.llM OIOA SI A.LNVl::ll::IVM SIH.l
S.Ldl3:>3l::I 1::1noA 3AVS
A.LNVl:l l:1'1 M
J0J0WOWJ0lU paJBJJUI
.1S:JHaf'JB.611WJ
2
90-DAY MONEY BACK GUARANTEE
This MASTERFORCE
™
brand tool carries our 90-Day Money Back Guarantee.
If you are not completely satisfied with your MASTERFORCE
™
brand power tool for
any reason within ninety (90) days from the date of purchase, return the tool with your
original receipt to any MENARDS
®
retail store, and we will provide you a refund - no
questions asked.
3 YEAR LIMITED WARRANTY
This MASTERFORCE
™
brand tool carries our famous No Hassle 3 Year Limited
Warranty to the original purchaser. If, during normal use, this MASTERFORCE
™
power
tool breaks or fails due to a defect in material or workmanship, simply bring the tool with
the original sales receipt back to your nearest MENARDS
®
retail store. At its discretion,
MASTERFORCE
™
agrees to have the tool or any defective part(s) repaired or replaced
with the same or similar MASTERFORCE
™
product or part free of charge, within the
stated warranty period, when returned by the original purchaser with original sales
receipt. Not withstanding the foregoing, this 3 year limited warranty does not cover any
damage that has resulted from abuse or misuse of the Merchandise. This warranty: (1)
excludes expendable parts including but not limited to blades, brushes, belts, bits, light
bulbs, and/or batteries; (2) shall be void if this tool is used for commercial and/or rental
purposes; and (3) does not cover any losses, injuries to persons/property or costs. This
warranty does give you specific legal rights and you may have other rights, which vary
from state to state. Be careful, tools are dangerous if improperly used or maintained.
Seller’s employees are not qualified to advise you on the use of this merchandise. Any
oral representation(s) made will not be binding on seller or its employees. The rights
under this 3 year limited warranty are to the original purchaser of the merchandise and
may not be transferred to any subsequent owner. This 3 year limited warranty is in lieu
of all warranties, expressed or implied including warranties or merchantability and
fitness for a particular purpose. Seller shall not be liable for any special, incidental, or
consequential damages. The sole exclusive remedy against the seller will be for the
replacement of any defects as provided herein, as long as the seller is willing or able to
replace this product or is willing to refund the purchase price as provided above. For
insurance purposes seller is not allowed to demonstrate any of these power tools for you.
For questions / comments, technical assistance or repair parts -
Please call toll free at: 1-800-255-7011 (M-F 8am - 6pm CST)
To Next Page
Need help?
General