MasterForce 2600294ME - User Manual

24 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

OPERATOR’S MANUAL

80V BRUSHLESS SNOW

THROWER

270-3282

SNB403

To Reduce The Risk Of Injury, User Must Read

CAUTION

And Understand Operator’s Manual. Save These Instructions For

Future Reference.

2600294ME

Table of Contents

Questions and Answers

K
kclarkAug 11, 2025
Why doesn't my MasterForce Snow Blower start?
- P
  Parker SpencerAug 11, 2025
  If your MasterForce Snow Blower doesn't start, it could be due to several reasons. First, the battery might not be charged; in this case, charge the battery as described in the battery and charger manual. Alternatively, the battery may be too cold. Remove the battery and place it on the charger for 10 minutes, or until the charging light turns green, then reinstall it. If these steps don't resolve the issue, the switch might be defective and need replacement by an authorized service center. It's also possible that the battery requires service or replacement; call the toll-free helpline to determine the battery issue.
J
jasonandersonAug 21, 2025
What to do if the engine is on, but the impeller does not turn on my MasterForce 2600294ME?
- U
  ubakerAug 21, 2025
  If the engine of your MasterForce Snow Blower is running but the impeller isn't turning, it's likely that the belt is damaged and needs to be replaced.
B
Benjamin YoungAug 30, 2025
How to fix a MasterForce Snow Blower that leaves a thin layer of snow behind?
- K
  Kimberly TerrellAug 30, 2025
  If your MasterForce Snow Blower leaves a thin layer of snow behind, the scraper is likely damaged and needs to be replaced.

MasterForce 2600294ME Specifications

General

Drive Type	Self-Propelled
Engine Type	4-Cycle
Engine Displacement	208 cc
Auger Material	Steel
Tire Type	Pneumatic
Power Source	Gasoline
Clearing Width	24 inches
Intake Height	20 inches
Tire Size	13 in x 4 in

Related product manuals

Preview: MasterForce 270-3282

MasterForce 270-3282