Page 17
The line keeps
breaking.
The machine is used
incorrectly.
1. Cut with the tip of the line, avoid stones,
walls and other hard objects.
2. Advance the cutting line regularly to keep full
cutting width.
The grass winds
around the trimmer
head and motor
housing.
Cut tall grass at
ground level.
1. Cut tall grass from the top down.
2. Remove no more than 8" in each pass to
prevent wrapping.
The line does not cut
well.
The cut-off blade
becomes dull. it.
Vibration increases
noticeably.
The line is worn down
on one side and not
the other.
Make sure that the line on both sides is normal.
Advance the line.
TROUBLESHOOTING
To Next Page
Loading...
