Masterplug 7 Day Electronic Timer - Compact User Manual

OWER
masterplug
7 DAY ELECTRONIC TIMER - COMPACT
IMPORTANT
V
Don't plug in an appliance where the load exceeds 13 Amp. Alwaysensure the plugofany appliance is fully inserted intothe timeroutlet.
Ifcleaningofthe timeris required,remove from mains powerand wipetimerwitha dry cloth.
DO NOTIMMERSETIMERINWATEROR ANY OTHER LIQUID. Heaters and similarappliances should never be leftunattended during operation. The
manufacturer recommends such appliances not be connected to timers.
f
KEYBOARD DEFINITION
1. MASTER CLEAR: Clear all data in memory including current time and all programs.
2. RANDOM: Set or cancel random function.
3. CLOCK: Set current time combined with buttons WEEK, HOUR, MIN. Select 12 or 24 hour mode combined with button TIMER. Activate summertime function
combined wftfi button ON/AUTOfOFF.
4. TIMER: Set programs combined with buttons WEEK, HOUR, MIN.Select 12 or 24 hour mode combined with button CLOCK
5. ON/AUTO/OFF: Select operating modes of timer.
6. WEEK: Set week combined with button CLOCK or TIMER.
7. HOUR: Set hour combined with button CLOCK or TIMER.
8. MIN: Set minute combined with button CLOCK or TIMER.
9. RSTra&'L-Oreswte programs or recall the overridden programs.
10. LED:Shows status of power output. When the indicator is ON,there is power output. When the indicatoris OFF, there is no power output.
INITIAL OPERATION
1. Plug the timer intoa regular 250 Volts power outletand turn the power on. Leave forapproximately 14 hours to charge
the Memory Back-up battery.
2. Clearall current information by pressing MASTERCLEARbutton witha sharp object such as a pen or pencil aftercharging.
3. The timer is now ready to be set up for use.
SETTING CURRENT TIME
1. Press CLOCK buttonand hold,simultaneouslypress WEEK button until the actualday is displayed.Continueby pressing HOURor
MIN button until the currenthouror minuteis displayed. Whensetting,the buttons WEEK, HOUR or MIN can be helddownforrapid forward counting.
2. Release both buttons. The week and time will be seL
3. To reset incorrect time, repeat above steps.
GENERAL FEATURES
10 ON/OFF programs with 1 minute step.
Output LED indicator.
Displaywrth
second.
MANUAL ON/AUTO/MANUAL OFF selectable.
Random function with a random advance of 10-31minutes between 6:00 PM and 6:00 AM.
12/24 hour mode selectable.
Summer time function available.
16 combinations of day or blocks of days available as follows:
MO TU WE TH FR SA SU
MO, TU, WE, TH, FR, SA, SU
MO, TU, WE, TH, FR
SA.SU
MO,TU,WE.TH,FR,SA
MO, WE, FR
TU.TH.SA
MO.TU.WE
TH. FR, SA
MO, WE, FR, SU
SPECIFICATIONS
Voltage: 240VAC, 50Hz
Max Load: 13(2)A,U,3120W
Min.Setting Time:1 Minute
.
Operatingtemperature: -10°Cto +40"C
Accuracy: +/-1 minute per month
Battery backup: NiMH 1.2V> 100hours
IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN
Masterplug Helpline: 0845 194 7584
Visit our Website: www.masterplug.com
make the right connection
J

Masterplug 7 Day Electronic Timer - Compact Specifications

General

Type	Electronic Timer
Compact Design	Yes
Programmable	Yes
Brand	Masterplug
Model	7 Day Electronic Timer - Compact
Operating Voltage	230V
Frequency	50Hz
Maximum Load	13A
Minimum Switching Time	1 minute
Number of On/Off Programs	20
Backup Battery	Yes
Number of Sockets	1
Display	LCD
Features	Random
Timer Settings	Weekly

Summary

Keyboard Definition

MASTER CLEAR Button

Clears all memory data, including current time and programs.

RANDOM Button

Sets or cancels the random function for timed operation.

CLOCK Button

Used to set current time, 12/24 hour mode, and activate summertime.

TIMER Button

Used to set ON/OFF programs and select 12/24 hour mode.

ON/AUTO/OFF Button

Selects the timer's operating modes: ON, AUTO, or OFF.

WEEK Button

Used in conjunction with CLOCK or TIMER to set the day of the week.

HOUR Button

Used in conjunction with CLOCK or TIMER to set the hour.

MIN Button

Used in conjunction with CLOCK or TIMER to set the minute.

RST/RCL Button

Allows overriding or recalling previously overridden programs.

LED Indicator

Shows the status of power output; ON means power is outputting.

Initial Operation

Battery Charging

Plug the timer into a power outlet and leave for 14 hours to charge the backup battery.

Clearing Data

Clear all current information using the MASTER CLEAR button after charging.

Setting Current Time

Set Day and Time

Press CLOCK, WEEK, HOUR, and MIN buttons to set the current day and time.

Confirm Time Setting

Release buttons to set the week and time; repeat for incorrect time.

General Features

Programming Capabilities

Supports 10 ON/OFF programs with 1-minute steps and 16 day combinations.

Operation Modes

Features manual ON/AUTO/MANUAL OFF selection and a random function.

Display and Time Settings

Includes a display with seconds, 12/24 hour mode, and summer time function.

Specifications

Setting Programs

Program Entry Process

Step-by-step guide to setting ON/OFF programs using TIMER, WEEK, HOUR, MIN buttons.

Program Priority

Program OFF has priority over Program ON if settings overlap.

Program Example

Illustrates setting an everyday timer ON at 5:15 PM and OFF at 10:30 PM.

Manual ON/AUTO/MANUAL OFF Setting

Mode Selection

Cycles through MANUAL ON, AUTO, and MANUAL OFF modes using the ON/AUTO/OFF button.

Program Execution

Programs only execute in AUTO mode; MANUAL modes override all programs.

Random Function

Activating Random Function

Press RANDOM button to activate; LCD displays R(RANDOM).

Random Functionality

Applies a random advance of 10-31 minutes between 6 PM and 6 AM in AUTO mode.

Cancelling Random Function

Press the RANDOM button again to cancel the function.

12/24 Hour Mode

Switching Display Format

Press CLOCK and TIMER simultaneously to switch time display between 12 and 24 hour format.

Summertime Function

Activating Summertime

Press CLOCK and ON/AUTO/OFF simultaneously; LCD shows S and clock advances 1 hour.

Reverting to Winter Time

Press the same buttons again to revert to winter setting; clock moves back 1 hour.