masunt 520 M - Page 3

Key depot with combination lock
IMPORTANT NOTE:
The factory set code 3333 should be changed
before installation (see )!
 The key depot is designed not only for use in
indoor environments, but also in protected out-
door environments.
 Protect the key depot from spray water, dirt
and re.
 Do not oil or grease the lock and the number
wheels.
 Wipe the lock only with a damp cloth.
 Regularly treat the stainless steel with a stain-
less steel care product.
2
Thank you for choosing a premium quality product
from masunt. We are delighted to welcome you as
a new customer. More than 5,000 satised custo-
mers already rely on masunt products for smarter
key handover processes.
EN
Please register your product for support purposes and to
benet from the spare parts service:
For this, please send us an email with the invoice number or the
invoice date (in case of an order via third party providers, please
send us a copy of invoice) at info@masunt.com.
Please also indicate the code sequence (2XXXX) on the sticker
above the barcode on the product packaging. Thank you.
1 OPENING THE LOCK
2
SET A NEW CODE
3
EMERGENCY OPENING/CODE FINDING
For safety reasons,
code wheels turn
automatically back to
„0000“.
To open the lock turn
knob to „OPEN“.
Enter default code
(3333) or personal
code (****) .
Turn knob back to
„CLOSE“. New code
is set!
1. Turn knob to „C“.
2. Enter new code
„****“.
Enter personal code/
factory code at arrow
position „OPEN“.
Turn knob to the right
on „OPEN“. Code is
set automatically!
Turn key to the left.Insert key
into barrel.