Matco Tools MT2769 - Important Safety Warnings; Failure to Observe Warnings Could Result in Injury

MT2769 2 rev. 3/27/15
MT2769 1/2" IMPACT WRENCH
   

   
   

• Readandunderstandallinstructions.Failure tofollow
all instructions listed below, may result in electric
shock, fire, explosion and/or serious personal injury.
It is the responsibility of the owner to make sure all
personnel read this manual prior to using the tool. It is
also the responsibility of the tool owner to keep this
manual intact and in a convenient location for all to
see and read. If the manual or product labels are lost
or not legible, contact Matco Tools for replacements.
If the operator is not fluent in English, the product
and safety instructions shall be read and discussed
with the operator in the operator's native language by
the purchaser/owner or his designee, making sure that
the operator comprehends its contents.
• Always operate, inspect and maintain this tool in
accordance with American National Standards Institute
Safety Code of Portable Air Tools (ANSI B186.1) and any
other applicable safety codes and regulations.
• For safety,top performance and maximum durability of
parts, operate this tool at 90 psig; 6.2 bar max air
pressure with 3/8" diameter air supply hose.
• Always wear impact-resistant eye protection when
operating or performing maintenance on this tool (users
and bystanders).
• High soundlevels can causepermanent hearing loss.
Always use hearing protection as recommended by your
employer an OSHA regulations while using this tool
(users and bystanders).
• Keepthetoolinefficientoperatingcondition.
• Operators and maintenance personnel must be
physically able to handle the bulk, weight and power of
this tool.
• Airunderpressurecancausesevereinjury.Neverdirect
air at yourself or others. Always turn off the air supply,
drain hose of air pressure and detach tool from air supply
before installing, removing or adjusting any accessory
on this tool, or before performing any maintenance on
this tool. Failure to do so could result in injury. Whip
hoses can cause serious injury. Always check for
damaged, frayed or loose hoses and fittings, and replace
immediately. Do not use quick detach couplings at tool.
See instructions for correct set-up.
• Keeptooloutofreachofchildren.
• Airpoweredtoolscanvibrateinuse.Vibration,repetitive
motions or uncomfortable positions over extended
periods of time may be harmful to your hands and arms.
Discontinue use of tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before resuming use.
• Slipping, tripping and/or falling while operating air
tools can be a major cause of serious injury or
death. Be aware of excess hose left on the walking
or work surface.
• Keep body working stance balanced and firm. Do
not overreach when operating the tool.
• Placethetoolontheworkbeforestartingthetool.Donot
point or indulge in any horseplay with this tool.
• NotedirectionofrotationBEFOREoperatingthistool.
• Anticipate and be alert for sudden changes in motion
during start up and operation of any power tool.
• Do not carry tool by the hose. Protect the hose from
sharp objects and heat.
• Toolshaftmaycontinuetorotatebrieflyafterthrottleis
released. Avoid direct contact with accessories during
and after use. Gloves will reduce the risk of cuts or
burns.
• Keep away from rotating end of tool. Do not wear
jewelry or loose clothing. Secure long hair. Scalping
can occur if hair is not kept away from tool and
accessories. Choking can occur if neckwear is not
kept away from tool and accessories.
• Do not use(or modify) the tool for any other purpose
than that for which it was designed without consulting
the manufacturer's authorized representative.
• Impact wrenches are not torque control devices.
Fasteners with specific torque requirements must be
checked with suitable torque measuring devices after
installation with an impact wrench.
• Use only impact sockets or accessories. Do not use
hand sockets or accessories.
• Use only impact sockets and accessories that are
recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may
create a risk of injury when used on another tool.
• UseaccessoriesrecommendedbyMatcoTools.
• Donotlubricatetoolswithflammableorvolatileliquids
such as ker o sene, die sel or jet fuel.
• Thistoolisnotinsulatedagainstelectricshock.
• Thistoolmustnotbeusedinexplosiveatmospheres.
• Servicing and repairs should only be made by an
authorized service center.
• Donotforcetoolbeyonditsratedcapacity.
• Donotremoveanylabels.Replacedamagedlabels.
• Thisproductmaycontainoneormorechemicalsknown
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
thoroughly after handling.

WARNING