Matermacc Irrigamatic P350 User Manual

MANUAL
FOR USE AND
MAINTENANCE
IRRIGAMATIC
P 350 P 350
*FOR ENGLISH SYSTEM *m = FEET(fINDISPLAY)*FOR ENGLISH SYSTEM *m = FEET ( f IN DISPLAY )
reset
clear
test battest bat
reg +/-reg +/- vlv +/-vlv +/-
ON
OFF
START
*
m
h
P.I.
min
P.F.
min
PRO
GRAM
PRO
GRAM
h
m
*
SAN VITO AL TAGL. (PN) ITALY
TO
SAN VITO AL TAGL. (PN) ITALY
TO

Matermacc Irrigamatic P350 Specifications

General

Brand	Matermacc
Model	Irrigamatic P350
Category	Farm Equipment
Language	English

Summary

1. GENERAL FEATURES

2. INTRODUCTION

4. DESCRIPTION OF THE EQUIPMENT

5. CARRYING OUT THE IRRIGATION CYCLE

6. STARTING-UP

6.1 SWITCHING THE CONSOLE ON

Procedure to turn on the electronic console.

6.2 INITIALIZATION

Console performs automatic tests and preliminary operations.

6.3 END OF START-UP PHASE

Console is ready for programming and unwinding.

7. UNWINDING THE HOSE

7.1 MANUAL INPUT OR CORRECTION OF THE UNWOUND METERS

Manually input or correct unwound hose measurements.

8. PROGRAMMING

8.1 PROGRAMMING THE WORKING CYCLE

Setting parameters for the irrigation working cycle.

8.2 PROGRAMMING THE USER'S MENU

Accessing and configuring minor functions and settings.

8.3 DISPLAYING THE EXPECTED END-OF-IRRIGATION TIME

Calculating and displaying the expected time the irrigation cycle will finish.

9. WORKING CYCLE

9.1 WORKING CYCLE START

How to initiate the irrigation working cycle.

9.2 CARRING OUT THE WORKING CYCLE

Step-by-step process during an active irrigation cycle.

9.3 VISUALISATIONS

Information displayed during the working cycle.

9.4 SPECIAL VISUALISATIONS

Specific display indicators during certain irrigation conditions.

10. END OF WORKING CYCLE

10.1 END-OF-WORK PROCEDURE

Steps performed when the irrigation cycle concludes.

11. SPECIAL FUNCTIONS

11.1 END-OF-UNWINDING ADVISING

Alerts for a programmed quantity of hose unwound.

11.2 PROGRAMMED END-OF-IRRIGATION AFTER A CERTAIN NUMBER OF REWOUND METERS

Ending irrigation based on a set number of meters to rewind.

11.3 END-OF-IRRIGATION TIME LIMIT

Setting a time limit for the irrigation cycle to conclude.

12. SENSOR TEST

13. DISPLAY MESSAGES

13.1 OPERATING MESSAGES

Explains messages displayed during normal operation.

13.2 ERROR MESSAGES

Details about error messages and their causes.

13.3 MOTOR DRIVE MESSAGES

Messages related to motor operation and status.

14. EXTRA FUNCTIONS

Battery test

Checking the power supply battery status.

Reset

Restarting a cycle with existing programmed values.

Clear

Erasing programmed values to start a new cycle.

15. MANUAL MOTOR CONTROL

15.1 SPEED ADJUSTMENT MOTOR CONTROL

Manually adjusting the speed of the rewinding motor.

15.2 END-OF-WORK VALVE MOTOR CONTROL

Manually controlling the end-of-work valve.