2 of 32
Contents
Section Page
1. Safety 3
2. General Description 4
3. Parts Lists 9
4. Adding and removing Chain and Jackbars 15
5. Initial Set-up 15
6. Pipe to Pipe Set-Up without Level and Support 17
7. Pipe to Pipe Set-Up with Level and Support 17
8. Pipe to Elbow Set-Up with Elbow facing Downward 18
9. Pipe to Cross Tee Horizontal Fit-Up 19
10. Inspection and Repair Procedures 20
11. Subcomponent Assembly Procedures 27
12. Chain Clamp Assembly Procedures 28
13. Warranty 30
14. Intended Uses 31
15. Storage 31
16. Recycling of Components 31
The Mathey Dearman Chain Clamp is designed for the reforming and accurate
alignment of pipe, pipe fittings, flanges and weld-on valves for welding. It is not intended to
support or lift the entire length of the pipe. Always exercise extreme caution when using this
product.
To Next Page
Loading...